Skip to content
FL Wells

Place · Hillsborough County

How deep are wells in Bloomingdale?

Household (domestic) wells in Bloomingdale have a median reported depth of 160 ft. The middle half are between 125 ft and 195 ft, based on 498 SWFWMD records.

Typical household well

Reported total depth, feet below ground

0 ft100200300ground surfaceCasing ~71 ftmedian cased depthMedian 160 fthalf are shallower125–195 ftmiddle half of wells

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household (headline figure)498160 ft125–195 ft
Irrigation373200 ft150–245 ft
Public supply5200 ft190–210 ft
All water-supply876175 ft135–220 ft

How depths are spread

Household (domestic) wells: number of wells per depth band (ft)

05010025–50 ft: 2 wells50–75 ft: 19 wells75–100 ft: 33 wells100–125 ft: 63 wells125–150 ft: 87 wells150–175 ft: 94 wells175–200 ft: 78 wells200–225 ft: 57 wells225–250 ft: 27 wells250–275 ft: 14 wells275 ft or deeper: 24 wells2575125175225275+median 160 ft
Show as table
DepthWells
25–50 ft2
50–75 ft19
75–100 ft33
100–125 ft63
125–150 ft87
150–175 ft94
175–200 ft78
200–225 ft57
225–250 ft27
250–275 ft14
275 ft or deeper24

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of Bloomingdale →

About these numbers

  • Sources: Southwest Florida Water Management District (879 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: SWFWMD permits issued 1970–2026.
  • Approximate locations: 484 of 879 records (55%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in Bloomingdale?
Household (domestic) wells in Bloomingdale have a median reported depth of 160 ft. The middle half are between 125 ft and 195 ft, based on 498 SWFWMD records.
Will a new well at my property in Bloomingdale be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the Southwest Florida Water Management District. Each well in the lookup links to its original agency record.