Skip to content
FL Wells

Place · Volusia County

How deep are wells in Daytona Beach?

Household (domestic) wells in Daytona Beach have a median reported depth of 130 ft. The middle half are between 90 ft and 140 ft, based on 113 SJRWMD records.

Typical household well

Reported total depth, feet below ground

0 ft50100150200ground surfaceCasing ~93 ftmedian cased depth90–140 ftmiddle half of wellsMedian 130 fthalf are shallower

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household (headline figure)113130 ft90–140 ft
Irrigation1,93360 ft25–130 ft
Public supply11130 ft91–140 ft
All water-supply2,06170 ft25–130 ft

How depths are spread

Household (domestic) wells: number of wells per depth band (ft)

02040600–20 ft: 8 wells20–40 ft: 12 wells40–60 ft: 6 wells60–80 ft: 1 well80–100 ft: 2 wells100–120 ft: 6 wells120–140 ft: 46 wells140–160 ft: 25 wells160–180 ft: 6 wells180 ft or deeper: 1 well04080120160median 130 ft
Show as table
DepthWells
0–20 ft8
20–40 ft12
40–60 ft6
60–80 ft1
80–100 ft2
100–120 ft6
120–140 ft46
140–160 ft25
160–180 ft6
180 ft or deeper1

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of Daytona Beach →

About these numbers

  • Sources: St. Johns River Water Management District (2,572 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: the source layer for this area publishes no construction or permit date, so we can’t say how recent these wells are.
  • Approximate locations: 805 of 2,572 records (31%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in Daytona Beach?
Household (domestic) wells in Daytona Beach have a median reported depth of 130 ft. The middle half are between 90 ft and 140 ft, based on 113 SJRWMD records.
Will a new well at my property in Daytona Beach be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the St. Johns River Water Management District. Each well in the lookup links to its original agency record.