Skip to content
FL Wells

Place · Nassau County

How deep are wells in Hilliard?

Household (domestic) wells in Hilliard have a median reported depth of 115 ft. The middle half are between 100 ft and 140 ft, based on 69 SJRWMD records.

Typical household well

Reported total depth, feet below ground

0 ft100200300ground surfaceCasing ~96 ftmedian cased depthMedian 115 fthalf are shallower100–140 ftmiddle half of wells

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household (headline figure)69115 ft100–140 ft
Irrigation13120 ft80–180 ft
Public supply6810 ft310–820 ft
All water-supply89120 ft100–160 ft

How depths are spread

Household (domestic) wells: number of wells per depth band (ft)

020400–50 ft: 1 well50–100 ft: 15 wells100–150 ft: 38 wells150–200 ft: 4 wells200–250 ft: 4 wells250–300 ft: 0 wells300–350 ft: 3 wells350–400 ft: 0 wells400–450 ft: 0 wells450–500 ft: 0 wells500 ft or deeper: 4 wells0100200300400500+median 115 ft
Show as table
DepthWells
0–50 ft1
50–100 ft15
100–150 ft38
150–200 ft4
200–250 ft4
250–300 ft0
300–350 ft3
350–400 ft0
400–450 ft0
450–500 ft0
500 ft or deeper4

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of Hilliard →

About these numbers

  • Sources: St. Johns River Water Management District (106 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: the source layer for this area publishes no construction or permit date, so we can’t say how recent these wells are.
  • Approximate locations: 50 of 106 records (47%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in Hilliard?
Household (domestic) wells in Hilliard have a median reported depth of 115 ft. The middle half are between 100 ft and 140 ft, based on 69 SJRWMD records.
Will a new well at my property in Hilliard be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the St. Johns River Water Management District. Each well in the lookup links to its original agency record.