Skip to content
FL Wells

Place · Santa Rosa County

How deep are wells in Milton?

All water-supply wells in Milton have a median reported depth of 125 ft. The middle half are between 100 ft and 145 ft, based on 260 NWFWMD records.

Typical water-supply well

Reported total depth, feet below ground

0 ft50100150200ground surfaceCasing ~110 ftmedian cased depth100–145 ftmiddle half of wellsMedian 125 fthalf are shallower

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household12135 ft120–150 ft
Irrigation246125 ft100–140 ft
Public supply1—too few
All water-supply (headline figure)260125 ft100–145 ft

How depths are spread

All water-supply wells: number of wells per depth band (ft)

05010020–40 ft: 4 wells40–60 ft: 2 wells60–80 ft: 19 wells80–100 ft: 34 wells100–120 ft: 34 wells120–140 ft: 79 wells140–160 ft: 36 wells160–180 ft: 29 wells180–200 ft: 16 wells200 ft or deeper: 7 wells2060100140180median 125 ft
Show as table
DepthWells
20–40 ft4
40–60 ft2
60–80 ft19
80–100 ft34
100–120 ft34
120–140 ft79
140–160 ft36
160–180 ft29
180–200 ft16
200 ft or deeper7

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of Milton →

About these numbers

  • Sources: Northwest Florida Water Management District (728 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: the source layer for this area publishes no construction or permit date, so we can’t say how recent these wells are.
  • Approximate locations: 346 of 728 records (48%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in Milton?
All water-supply wells in Milton have a median reported depth of 125 ft. The middle half are between 100 ft and 145 ft, based on 260 NWFWMD records.
Will a new well at my property in Milton be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the Northwest Florida Water Management District. Each well in the lookup links to its original agency record.