Skip to content
FL Wells

Place · Pasco County

How deep are wells in River Ridge?

Household (domestic) wells in River Ridge have a median reported depth of 85 ft. The middle half are between 61 ft and 135 ft, based on 58 SWFWMD records.

Typical household well

Reported total depth, feet below ground

0 ft50100150200ground surfaceCasing ~63 ftmedian cased depthMedian 85 fthalf are shallower61–135 ftmiddle half of wells

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household (headline figure)5885 ft61–135 ft
Irrigation19260 ft42–105 ft
Public supply6285 ft180–310 ft
All water-supply25665 ft48–120 ft

How depths are spread

Household (domestic) wells: number of wells per depth band (ft)

05101520–40 ft: 3 wells40–60 ft: 10 wells60–80 ft: 10 wells80–100 ft: 12 wells100–120 ft: 6 wells120–140 ft: 3 wells140–160 ft: 1 well160–180 ft: 3 wells180–200 ft: 6 wells200–220 ft: 1 well220–240 ft: 0 wells240 ft or deeper: 3 wells2060100140180220median 85 ft
Show as table
DepthWells
20–40 ft3
40–60 ft10
60–80 ft10
80–100 ft12
100–120 ft6
120–140 ft3
140–160 ft1
160–180 ft3
180–200 ft6
200–220 ft1
220–240 ft0
240 ft or deeper3

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of River Ridge →

About these numbers

  • Sources: Southwest Florida Water Management District (256 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: SWFWMD permits issued 1979–2026.
  • Approximate locations: 75 of 256 records (29%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in River Ridge?
Household (domestic) wells in River Ridge have a median reported depth of 85 ft. The middle half are between 61 ft and 135 ft, based on 58 SWFWMD records.
Will a new well at my property in River Ridge be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the Southwest Florida Water Management District. Each well in the lookup links to its original agency record.