Place · Hillsborough County
How deep are wells in Town 'n' Country?
Household (domestic) wells in Town 'n' Country have a median reported depth of 86 ft. The middle half are between 70 ft and 115 ft, based on 461 SWFWMD records.
Typical household well
Reported total depth, feet below ground
Depth by well type
Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.
| Well type | Wells | Median | Middle half |
|---|---|---|---|
| Household (headline figure) | 461 | 86 ft | 70–115 ft |
| Irrigation | 467 | 135 ft | 85–180 ft |
| Public supply | 27 | 155 ft | 110–225 ft |
| All water-supply | 958 | 100 ft | 75–155 ft |
How depths are spread
Household (domestic) wells: number of wells per depth band (ft)
Show as table
| Depth | Wells |
|---|---|
| 0–20 ft | 1 |
| 20–40 ft | 11 |
| 40–60 ft | 51 |
| 60–80 ft | 90 |
| 80–100 ft | 128 |
| 100–120 ft | 69 |
| 120–140 ft | 37 |
| 140–160 ft | 21 |
| 160–180 ft | 14 |
| 180–200 ft | 10 |
| 200–220 ft | 7 |
| 220 ft or deeper | 22 |
Look up wells near a specific address
Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.
Or browse every well around the center of Town 'n' Country →
About these numbers
- Sources: Southwest Florida Water Management District (977 records). Records were fetched October 25, 2026.
- What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
- Dates: SWFWMD permits issued 1970–2026.
- Approximate locations: 497 of 977 records (51%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
- Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.
Questions
- How deep are wells in Town 'n' Country?
- Household (domestic) wells in Town 'n' Country have a median reported depth of 86 ft. The middle half are between 70 ft and 115 ft, based on 461 SWFWMD records.
- Will a new well at my property in Town 'n' Country be this deep?
- Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
- Where does this data come from?
- From public well-construction records published by the Southwest Florida Water Management District. Each well in the lookup links to its original agency record.